Cabinet hanger concealed behind rear panel, only cover caps visible inside the cabinet Handed Automatic hook off protection by surrounding the rail, no extra “locking” required With Transportation aid: wall rail can be locked between arm and plate for transport Automatic hook-off protection by surrounding the rail, no extra "locking" required → without tools Height and depth adjustment of the hanging cabinet conveniently from the front With transportation aid: Wall rail can be locked between arm and plate for transport Colour/finish zinc plated Area of application For hanging wall units Load bearing capacity per pair 130.00 kg Material Plastic, Steel Installation reference Cabinet hanger is mounted "invisibly" behind the rear panel (space requirement ≥16 mm) The version with short base plate must be fitted in the upper third of the cabinet for safety reasons. Screw in safety lock screw(s) at an angle of 45°. Pull out supporting arm completely prior to hooking in. Only use hand screwdriver for adjustment. For the version with long base plate, the hanger has to be screwed to the top panel as well; this results in a higher load bearing capacity. Standard The load bearing capacity of the cabinet hanger with short base plate is 65 kg/piece in accordance with the requirements of the DIN EN 15939 standard. Adjustment facility (with clearance 16 mm)Height and depth adjustment via ⌀ 12 mm drill holes Further adjustment facility (with clearance 16 mm) Height and depth adjustment via ⌀ 12 mm drill holes Order reference Wall rail 290.09.910 or 290.10.900 must be used in order to guarantee functionality. Please note the safety information for cabinet hangers. Supplied with 1 cabinet hanger 2 cover caps Additional information attributes The version with short base plate must be fitted in the upper third of the cabinet for safety reasons. Screw in safety lock screw(s) at an angle of 45°. Pull out supporting arm completely prior to hooking in. Only use hand screwdriver for adjustment. For the version with long base plate, the hanger has to be screwed to the cabinet top panel as well; this results in a higher load bearing capacity.